我司有**款直径为12mm的圆形产品，它是3M200的材质（无基材双面胶），客户要求保留原离型纸，还要6*6**板的排列，要去掉产品四周废料（离形纸和胶）和产品上的离形纸后反贴**板离形纸。请问各位同行有什么好的方法操作

开六模的磨具直接冲即可

laminate a easy release gassine liner on the adhesive, then die cut it with 6 cavity die, strip of the liner waste, then laminate a single side tape to strip the adhesive waste and top liner on adhesive. at last laminate a fresh liner to the part. you had better to handle it with rotary die cut machine die.

太简单了.我想你现在已经搞定了就不用告诉你了要是还没有的话就打13537686721