[供应] 多工位圆刀套位全自动滚刀机

有 效 期:永久

产品规格:200

产品数量:2

包装说明:200

价格说明:57000

快速联系:0512-56413077 / 13913756396 张霞(女士)

详细说明:

多工位圆刀套位全自动滚刀机设计亮点

安徽富日智能装备有限公司
圆刀模切机价格 江苏圆刀模切机 多工位圆刀机


1.主操作采用电脑触摸式工控机,图形显示,直观明了,操作便捷可同时使用键盘和鼠标以及用手触摸。
The main operation interface adopts touch panel, with picture display for easy operation.
Keyboard, mouse and hand touch are all available.
2.可存储500种以上SOP数据,提高标准程度,对员工的经验依赖程度降低,并可减少调刀过程材料浪费率60%以上。
It can save more than 500 kinds of SOP data, improve standard level, and reduce dependence on
Operator’s  experience and reduce more than 60% material waste.
3.所有收放料轴分别由马达**立驱动,收放料、正反转自由,灵敏度张力传感轴反馈控制,使材料运行平稳,顺畅。
All unwind & rewind shafts are driven separately by servo motors. The unwinding, rewinding, straight & reverse rotation are more flexible and controlled by high sensitivity tension sensor shaft’s feedback to ensure smooth running.
4.所有刀座的运动控制由德国Lenz的伺服马达驱动,扭力大,加减速稳定,**立可调,套切精度可达±0.075mm。
All cutter holder’s movements are controlled by German Lenz servo motor with enough torsion, stable acceleration and deceleration, precision can be ±0.075mm.
5.控制系统由德国Lenz PLC和同步控制器共同完成控制,同步性高。
The control system is operated by German Lenz PLC and logic movement controller with         better synchronism.
6.整机具备异步模切功能,可节省模切材料。
Machine has the function of asynchronous laminating which can save material.
7.带移动式辅助放料轴。
Movable auxiliary unwind shaft.
8.配备主放料EPC纠偏装置,使材料进入刀座稳定。

圆刀模切机价格 江苏圆刀模切机 多工位圆刀机

安徽富日智能装备有限公司


分享此模切货源的方式

我要评论:( 请您说点什么吧!)

评论 注册用户登录后才能发表评论,请登录 企业会员个人会员