详细说明：
超耗散型防静电保护膜系列6
Ultra Consumption Scattered Antistatic Protective Film Series
**、产品介绍
I. Product Introduction
采用行业**先进的工艺配方，在PET基材表面及亚克力胶层面进行防静电处理。具有双面防静电功能。适用于FPC、LCD、LED、ITO专用防静电保护膜，是目前这个领域内唯****款专用产品。它的技术优势在于胶层阻抗很低106-7Ω，静电耗散0.4S完成。胶面分离产生电压≤30V，很大程度上满足这些产品技术发展要求。
Using the most advanced technology formula of industry, the PET substrate surface and acrylic adhesive layer are processed by antistatic treatment. The products have double-sided antistatic function. It can be used in FPC, LCD, LED, ITO dedicated antistatic protective film. It is the only special product in this field presently. Its technology advantage is that the layer impedance is very low with 106-7Ω. The static dissipation can be finished in 0.4S. Plastic surface of the separation voltage is not more than 30V. It can largely meet the technical requirements of the development of the products.
二、产品特性
II. Product Characteristics
1、1000**净化车间内制造、优良外观性能。
2、低粘性能并且有自动力吸附功能。
3、胶面具有半永久防静电特殊功能的高性能保护膜。
4、双面防静电，PET表面电阻106-9Ω，胶层电阻106-7Ω，分离电压≤30V，5、防止空气中的灰尘和微粒子被产品表面吸附及微电子产品被静电击穿损坏。
6、贴附剥离力后无残胶、无痕迹、不起白雾、胶面防静电材料不迁移等优点。
1. The products have excellent appearance, and they are produced in the clean room whose level is 1000 grade.
2. The products have low viscosity performance and automatic power absorption features.
3. The plastic surfaces have high-performance protective film with semi-permanent and antistatic special features.
4. The products have double-sided antistatic function. The PET surface resistance is 106-9Ω. The layer resistance is 106-7Ω. The separation voltage is not more than 30V.
5. They can prevent the products surface from adsorption of dust and fine particles in the air, and the microelectronic products from breakdown damage by static electricity.
6. The products have the advantages such as no residual glue after gluing, traceless, no white mist, no migration of the plastic surface of antistatic material.
三、产品结构
III. Product Structure
防静电层Antistatic layer
PET基材PET base film
ESD胶层 ESD adhesive
离型膜release film
|
四、产品应用
IV. Product Application
1、适用于FPC、PCB触摸屏模块等制造部件保护。
2、适用于ITO膜、控制面板，液晶显示器屏幕制程过程中的保护
3．减少因静电造成产品损伤，提高品质及产品合格率。
1. They are suitable for the protection of manufacturing components such as touch screen module of FPC, PCB.
2. They are suitable for the process protection of ITO film, control panel and LCD screen.
3. They can reduce product damage caused by static electricity and improve the quality and rate of qualified products.